Welcome to the Powertec Support Portal

Articles in this section

What connections are available on my Cellferno unit?

  • Updated

Hardware Overview

mceclip0.png

1 Ethernet (RJ-45) port

Connect to the passive PoE adapter using an Ethernet cable.

2 LED Indicators + SIM card slot + Reset button
LED Indicators:

  • The left LED indicates power status.
  • The right LED indicates signal strength.

SIM card slot:

  • Insert the SIM card.

mceclip1.png

Reset button:

  • Short press to restart the device.
  • Long press for 10 seconds to reset the settings to the factory default settings.

mceclip2.png

3 Grounding Terminal

Connect a grounding cable to the terminal and a ground connection.

NOTE 1
Use with Ethernet lightning protector between the Ethernet cable and the PoE is suggested for better lightning and surge protection.

NOTE 2
For additional lightning protection, the use of a lightning arrestor on the Ethernet cable near the area where the Ethernet cable enters a building is suggested.