In most configurations, the FW2000e is used with a dynamic IP and SIM and the Access Point Name (APN) is available from the network, for example: internet. However, if you are on a private network, you may need to set the APN on this tab for the network to communicate with the FW2000e.
APN: Enter the APN for your private network.
(CAUTION! Changing the APN may cause a loss of data connectivity.)
Authentication: Select the authentication method for your private network from the drop-down (PAP, CHAP, or None).
Username: Enter the user name for your private network.
Password: Enter the password for your private network.
Retain these settings during factory reset: When the ON/OFF slider is ON, your FW2000e will keep these APN settings after a factory reset.
Apply these settings to current SIM only: When the ON/OFF slider is ON, your FW2000e will only apply these APN settings to the current SIM.
Click Save Changes. The device will reboot for changes to take effect.