If this is the first time you are configuring the router, please use the default settings below:

IP Address: 192.168.1.1
Username: admin
Password: password

Connect your PC to LAN port of UR32 router. Usually your PC will obtain an IP address automatically, or you can configure a static IP address manually. The following steps are based on Windows 10 operating system for your reference.

(Note: As remote access is disabled by default, you can't access to the router's Web GUI if you connect PC to WAN port of the router. But it will function properly if you enable it.)

1. Click “Search Box” to search “Control Panel” on the Windows 10 taskbar. 

2. Click “Control Panel” to open it, and then click “View network status and tasks”.

3. Click “Ethernet” (May have different names).

4. Click “Properties”

5. Highlight (blue) “Internet Protocol Version 4 (TCP/IPv4)” to configure IP address and DNS server.

6. Obtain an IP address

Method 1: click “Obtain an IP address automatically”	Method 2: click “Use the following IP address” to assign a static IP manually within the same subnet of the router.

(Note: Remember to click “OK” to finish configuration.)