Backup

1. Maintenance > Backup and Restore: click Backup
2. A file will be downloaded with the config
3. Take note of the location where the file is saved to use in future / relocate the file to secure storage.

Restore

1. Maintenance > Backup and Restore: Click Browse, select the configuration file, click Open
2. Click Import
3. Wait till the configuration is uploaded. You will need to login again - keep in mind that the router now have new configuration so you will need to know the details in that config to access the router.

Warning:

* Do NOT use a config file to restore settings unless you know what is in the file. This may result in router being inaccessible afterwards.

** It is always a good practice to backup the router's current configuration before uploading  a new configuration. 

*** In the event the router is inaccessible, perform a hardware reset.

Hardware Reset:

1. Locate the Reset Button on the router and take corresponding actions based on the status of System LED
   1. Blinking : Press and hold the reset button for more than 5 seconds
   2. Static Green -> Rapidly blinking : Release the button and wait
   3. Off -> Blinking : The router is now reset to Factory Defaults.

Finding out new router IP:

There are several ways to find out the router IP address:

1) Connect router directly to a laptop

2) Open Command Prompt, run command ipconfig, find the default gateway for the router connection

Alternatively navigate to the property of the Network Connection.